发电机 发电机组 GENERATOR SET GENERATOR http://www.shx.com.cn http://en.shx.com.cn
(1) GENERATOR wiring must be correct, this should first identified the terminal or the Lead-out is a FireWire or Datie line. Typically, generators are used each terminal or pin-out is the difference between a certain tag to FireWire or tower wire. Datie terminal commonly used letter "M", "N" or "O" as a mark, and in the terminal marked with Datie symbol next to "⊥" the. When Da Tie-line column can seize unmarked, it can operate in the GENERATOR process, with the voltage meter or "meet again" method tests to determine.

(2) generators in each circuit load, generators should be equipped with manual use, not to arbitrarily increase or decrease in the number or change light bulbs with different power.

(3) with belt drive GENERATOR, should be properly adjust the degree of drive belt tensioner. A general belt with your fingers press the middle sag 10 ~ 20 mm is appropriate.

(4) The generators of each work for a period of time, should examine and adjust the manual requirements. Such as the SFF a 45-type GENERATOR, a requirement for the demolition of around 500 hours of inspection and maintenance; JF 1 6l GENERATOR provides about 1,000 hours of normal operation of inspection and maintenance to be demolished.